Tabla de contenido
Idiomas disponibles
Idiomas disponibles
2610056735 02-21 PS130_BM 2610015935 02-12.qxp 2/15/21 10:23 AM Page 3
Use personal protective equipment.
b.
Always
wear
Protective equipment such as a dust
mask, non-skid safety shoes, hard hat,
or hearing protection used for
appropriate conditions will reduce
personal injuries.
Prevent unintentional starting. Ensure
c.
the switch is in the off-position before
connecting to power source and / or
battery pack, picking up or carrying
the tool. Carrying power tools with your
finger on the switch or energizing
power tools that have the switch on
invites accidents.
Remove any adjusting key or wrench
d.
before turning the power tool on. A
wrench or a key left attached to a
rotating part of the power tool may
result in personal injury.
e.
Do not overreach. Keep proper
footing and balance at all times. This
enables better control of the power
tool in unexpected situations.
Dress properly. Do not wear loose
f.
clothing or jewelry. Keep your hair
and clothing away from moving parts.
Loose clothes, jewelry or long hair can
be caught in moving parts.
g.
If devices are provided for the
connection of dust extraction and
collection facilities, ensure these are
connected and properly used. Use of
dust collection can reduce dust-related
hazards.
Do not let familiarity gained from
h.
frequent use of tools allow you to
become complacent and ignore tool
safety principles. A careless action
can cause severe injury within a
fraction of a second.
4. Power tool use and care
a.
Do not force the power tool. Use the
correct
power
application. The correct power tool
will do the job better and safer at the
rate for which it was designed.
Do not use the power tool if the switch
b.
does not turn it on and off. Any power
tool that cannot be controlled with the
switch is dangerous and must be
repaired.
c.
Disconnect the plug from the power
source and/or remove the battery
pack, if detachable, from the power
tool before making any adjustments,
changing accessories, or storing
eye
protection.
tool
for
your
-3-
power tools. Such preventive safety
measures reduce the risk of starting
the power tool accidentally.
Store idle power tools out of the
d.
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate
the power tool. Power tools are
dangerous in the hands of untrained
users.
Maintain power tools and accessories.
e.
Check for misalignment or binding of
moving parts, breakage of parts and any
other condition that may affect the
power tool's operation. If damaged, have
the power tool repaired before use.
Many accidents are caused by poorly
maintained power tools.
f.
Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
Use the power tool, accessories and
g.
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool
for operations different from those
intended could result in a hazardous
situation.
h.
Keep handles and grasping surfaces
dry, clean and free from oil and
grease. Slippery handles and grasping
surfaces do not allow for safe handling
and control of the tool in unexpected
situations.
5. Battery tool use and care
Recharge only with the charger
a.
specified by the manufacturer. A
charger that is suitable for one type of
battery pack may create a risk of fire
when used with another battery pack.
b.
Use
power
tools
specifically designated battery
packs. Use of any other battery packs
may create a risk of injury and fire.
When battery pack is not in use,
c.
keep it away from other metal
objects like paper clips, coins, keys,
nails, screws, or other small metal
objects that can make a connection
from one terminal to another.
Shorting the battery terminals
together may cause burns or a fire.
d.
Under abusive conditions, liquid may
be ejected from the battery, avoid
contact. If contact accidentally
only
with
Tabla de contenido
