Assembling The Blower; Assembling The Vacuum Shredder - Stihl BGE 61 Manual De Instrucciones

English

Assembling the Blower

Disconnect the plug from the power
N
supply.
Mounting the Blower Tube
BGE 71, BGE 81:
Your blower can be switched on only
when the blower tube is properly
mounted. The union nut activates a
switch which closes the circuit to allow
the motor to be switched on.
5 4
3
Line up the recesses. The arrow (2)
N
must be on the top of the blower
tube (1).
Push the blower tube (1) into the
N
blower housing stub (3) as far as the
stop.
Push the union nut (4) over the
N
blower housing stub (3) and turn it in
the direction of the arrow until the
tab (5) engages the opening (6) in
the union nut.
BGE 71, BGE 81:
You will hear the safety switch being
N
activated.
28
Mounting the Nozzle
Push the nozzle (5) onto the blower
N
tube (1) as far as lug (6),
position (a) (long) or position (b)
(short), and rotate the nozzle in the
direction of the arrow to it lock in
2
position.
1
Removing the Blower Tube
6
Switch off the motor.
N
Press down the lock button by
N
inserting a suitable tool through the
opening in the union nut.
Rotate the union nut (4) in the
N
direction of arrow as far as the stop.
Remove the blower tube (1).
N
Assembling the Vacuum
Shredder
Your vacuum shredder can be switched
on only when the elbow and suction tube
are properly mounted. The union nuts
activate a switch which closes the circuit
to allow the motor to be switched on.
a b
6
N
Mounting the Elbow
Make sure the zipper on the catcher bag
is closed.
1
4
N
N
BGE 61, BGE 71, BGE 81, SHE 71, SHE 81
Disconnect the plug from the power
supply.
WARNING
3
1
4
Push the elbow (1) into the catcher
bag (2) as far as the mark (smaller
arrow).
Tighten strap (3) on catcher bag
and press down the buckle tab (4).
2