State Of Charge; Leds; Assembling The Blower; Mounting The Blower Tube And Nozzle - Stihl BGA 45 Manual De Instrucciones

English
► Insert the charger plug (4) in the charge socket (5).
The LEDs (6) glow green and show the state of charge.
► If the LEDs (6) stop glowing: Disconnect the charger plug
(4) from the charge socket (5).
The blower is fully charged.
► Disconnect the plug (2) from the wall outlet (1).
6.2

State of Charge

1
► Press the button (1).
The LEDs (5) glow green for about 5 seconds and indicate
the state of charge.
► If the LED on the right flashes green: Recharge the
blower.
6.3

LEDs

The LEDs can indicate the state of charge or malfunctions in
the blower. The LEDs can glow or flash green or red.
The state of charge is indicated when the LEDs glow or flash
green.
► If the LEDs glow or flash red: Troubleshooting, @ 17.
Malfunction in blower.

7 Assembling the Blower

7.1

Mounting the Blower Tube and Nozzle

► Switch off the blower and remove the activation key.
32
80-100%
60-80%
40-60%
20-40%
0-20%
2
3
1
4
► Line up the hole (2) and the lug (3).
► Push the nozzle (1) onto the blower tube (4).
The nozzle (1) engages audibly and can no longer be
removed.
► Line up the lug (6) and the slot (5).
► Push the blower tube (4) onto the housing (7).
► Rotate nozzle (4) in direction of
There is no need to remove the blower tube again.
8 Inserting and Removing Activation
Key
8.1

Inserting the Activation Key

2
1
► Insert the activation key (1) in the socket (2).
7 Assembling the Blower
7
5
6
until it engages.
0458-719-9821-B