Idiomas disponibles
Idiomas disponibles
NOISE INFORMATION
(CUTTING WOOD/CUTTING
METAL)
A weighted sound pressure
A weighted sound power
K
&K
pA
wA
Wear ear protection
NOISE INFORMATION
(CUTTING TILE)
A weighted sound pressure
A weighted sound power
K
&K
pA
wA
Wear ear protection
VIBRATION INFORMATION
CUTTING WOOD/CUTTING
16
METAL)
Vibration total values (triax vector sum) determined
according to EN 62841:
Vibration
emission value:
The declared vibration total value and the declared
noise emission value have been measured in
accordance with a standard test method and may
be used for comparing one tool with another.
The declared vibration total value and the declared
noise emission value may also be used in a
preliminary assessment of exposure.
WARNING: The vibration and noise
emissions during actual use of the power tool
can differ from the declared value depending on the
ways in which the tool is used especially what kind
of workpiece is processed dependant on the
following examples and other variations on how the
tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well
maintained.
20V Cordless Brushless Circular saw
L
= 81.2dB(A)
pA
L
= 92.2dB(A)
wA
L
= 88.5dB(A)
pA
L
= 99.5dB(A)
wA
= 0.469m/s
Cutting wood:a
h,
w
Uncertainty K = 1.5m/s²
Cutting metal: a
= 0.455m/s
h,M
Uncertainty K = 1.5m/s²
The use of the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any
anti vibration and noise accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately
managed.
3dB(A)
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing
the job. This may significantly reduce the exposure
level over the total working period.
Helping to minimise your vibration and noise
exposure risk.
Always use sharp chisels, drills and blades.
Maintain this tool in accordance with these
instructions and keep well lubricated (where
3dB(A)
appropriate).
If the tool is to be used regularly then invest in anti
vibration and noise accessories.
Plan your work schedule to spread any high
vibration tool use across a number of days.
VIBRATION INFORMATION
(CUTTING TILE)
Vibration total values (triax vector sum) determined
according to EN 60745:
Vibration
2
emission value:
2
The declared vibration total value may be used for
comparing one tool with another, and may also be
used in a preliminary assessment of exposure.
WARNING: The vibration emission value
during actual use of the power tool can differ
from the declared value depending on the ways in
which the tool is used dependant on the following
examples and other variations on how the tool is
used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well
maintained
Using the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any
anti vibration accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed
Cutting tile: a
=0.466m/s
h
Uncertainty K = 1.5m/s²
2
EN
