Sony Wega KDE-W50A11E Manual De Instrucciones página 34

34
GB
Option Description
Programme
Presets programme channels manually.
1 Press M/m to select "Programme", then press OK.
System
2 Press M/m to select the programme number you want
Channel
3 Press M/m to select "System", then press OK.
4 Press M/m to select one of the following TV broadcast
5 Press M/m to select "Channel", then press OK.
6 Press M/m to select "S" (for cable channels) or "C" (for
7 Tune the channels as follows:
8 Press OK.
9 Press m to select "Confirm", then press OK.
10 Press m to select "OK", then press OK.
Repeat the procedure above to preset other channels manually.
Label Assigns a name of your choice, up to five letters or numbers, to the
selected channel. This name will be displayed briefly on the screen
when the channel is selected.
1 Follow steps 3 to 5 of "Programme Labels" (page 32).
2 Press m to select "Confirm", then press OK.
3 Press m to select "OK", then press OK.
AFT Fine-tunes the selected programme number manually if you feel
that a slight tuning adjustment will improve the picture quality.
(Normally, fine tuning is performed automatically.)
1 Press M/m to adjust the fine tuning over a range of -15
2 Press m to select "Confirm", then press OK.
3 Press m to select "OK", then press OK.
To restore automatic fine tuning, select "On" in step 1.
to manually tune (if tuning a VCR, select channel 0),
then press <.
Note
Depending on the country/region selected for "Country"
(page 31), this option may not be available.
systems, then press <.
B/G: For western European countries/regions
D/K: For eastern European countries/regions
I: For the United Kingdom
L: For France
terrestrial channels), then press ,.
If you do not know the channel number (frequency)
Press M/m to search for the next available channel. When a
channel has been found, the search will stop. To continue
searching, press M/m.
If you know the channel number (frequency)
Press the number buttons to enter the channel number of the
broadcast you want or your VCR channel number.
to +15, then press OK.