Sony Wega KDE-W50A11E Manual De Instrucciones página 16

To Do this
Return to the Press
previous channel
watched (for more
than five seconds)
Access the Press OK. To select an analogue
channel, press M/m, then press
Programme index
table (in analogue OK.
mode only) To access the Input signal index
table, see page 21.
To access Text
Press /. Each time you press /, the display changes
cyclically as follows:
Text t Text over the TV picture (mix mode) t No
Text (exit the Text service)
To select a page, press the number buttons or PROG
+/-.
To hold a page, press
To reveal hidden information, press
Tips
• Ensure that the TV is receiving a good signal, or some text
errors may occur.
• Most TV channels broadcast a Text service. For
information on the use of the service, select the index page
(usually page 100).
• When four coloured items appear at the bottom of the Text
page, Fastext is available. Fastext allows you to access
pages quickly and easily. Press the corresponding
coloured button to access the page.
To access NexTView (depending on
availability of service)
NexTView is an electronic programme guide.
1
When a channel which provides a
NexTView service is selected ("NexTView"
is displayed as soon as the data is
available), press
2
Press M/m/</, to select the displayed
option, then press OK to confirm.
To turn off NexTView, press
16
GB
.
/ .
/ .
.
again.
(All)/ (Entertainment)/
1
(Art)/ (Sports)/
(Movies)/ (Music):
Lists programmes by category.
(Only when more than eight channels
2
provide NexTView):
Creates a channel list. You can store up to eight
channels. To restore the factory setting channels,
select "Auto B".
:
3
Shows a reminder list (for details, see "5 Info:").
4 Programmes:
Displays the programme list by time when the TV
receives 50% or less of the NexTView data
("NexTView" is displayed in orange when a channel
is selected), and displays the programme list by time
and channel when the TV receives more than 50% of
the NexTView data ("NexTView" is displayed in
black when a channel is selected). The percentage
may differ depending on your area.
5 Info:
Displays programme description.
To record the programme (only VCRs which support
SmartLink and Timer Programming features), press
the red button.
To display a reminder message when the programme
is broadcast, press the green button. You can set up
to five programmes.
Notes
• Wrong characters appear on the screen if the language
used in the NexTView does not match the language set on
your TV. Set "Language" to the language used in the
NexTView (page 31). Also set "Country" to the country/
region from which the NexTView programme is broadcast
(page 31).
• "Record" and "Remind" are not available once the
programme has started.
(Children)/
(News)/