Sony Esprit TAV-L1 Manual De Instrucciones página 46

Manual Programme Preset
(Analogue mode only)
Before selecting [Label]/[AFT]/[Audio Filter]/[Skip]/
[Decoder]/[ATT], press PROG +/– to select the
programme number with the channel. You cannot
select a programme number that is set to skip
(page 47).
1
Press (OK) to select [Manual
Programme Preset].
2
Press M/m to select one of the following
options, then press
Option Description
Programme Presets programme channels
manually.
1
2
3
System
4
46
GB
(OK).
Press M/m to select
[Programme], then
press (OK).
Press M/m to select the
programme number
you want to manually
tune (if tuning a VCR,
select channel 0), then
press <.
Press M/m to select
[System], then press
(OK).
Note
Depending on the country/
region selected for
[Country] (page 44), this
option may not be
available.
Press M/m to select
one of the following TV
broadcast systems,
then press <.
[B/G]: For western
European countries/regions
[D/K]: For eastern
European countries/regions
[I]: For the United
Kingdom
[L]: For France
Option Description
5
Channel Press M/m to select
[Channel], then press
6
Press M/m to select [S]
(for cable channels) or
[C] (for terrestrial
channels), then press
,.
7
Tune the channels as
follows:
If you do not know the
channel number
(frequency)
Press M/m to search for the
next available channel.
When a channel has been
found, the search will stop.
To continue searching,
press M/m.
If you know the channel
number (frequency)
Press the number buttons to
enter the channel number
of the broadcast you want
or your VCR channel
number.
8
Press
9
Press m to select
[Confirm], then press
OK.
10
Press m to select [OK],
then press
Repeat the procedure above to
preset other channels manually.
Label Assigns a name of your choice,
up to five letters or numbers, to
the selected channel. This
name will be displayed briefly
on the screen when the channel
is selected.
1
Follow steps 3 to 5 of
[Programme Labels
(Analogue mode only)]
(page 45).
2
Press m to select
[Confirm], then press
3
Press m to select [OK],
then press
(OK).
(OK).
(OK).
(OK).
(OK).