Sony Esprit TAV-L1 Manual De Instrucciones página 33

x When playing a DATA CD/DATA DVD (DivX
video)
Example: MP3 audio
1:
MP3 128k
Bit rate
Selecting a playback layer for a Super
Audio CD
(Super Audio CD only)
Some Super Audio CDs consist of a Super Audio CD
layer and a CD layer. You can select the playback
layer you want to listen to.
Press SA-CD/CD. (If a disc is playing, press
x to stop playback, then press SA-CD/CD.)
Each time you press the button, a Super Audio CD
layer or a CD layer is alternately selected. When
playing a Super Audio CD layer, "SA-CD" lights up
in the front panel display.
Notes
• For details about Super Audio CD discs, see page 28.
• Each play mode function works only within the selected
layer.
Playing VIDEO CDs with PBC functions
(Ver.2.0)
(PBC Playback)
(VIDEO CD only)
With PBC (Playback Control) functions, you can
enjoy simple interactive operations, search functions,
and other such operations.
PBC playback allows you to play VIDEO CDs
interactively by following the menu on the TV screen.
1
Start playing a VIDEO CD with PBC
functions.
The menu for your selection appears.
2
Select the item number you want by the
number buttons.
3
Press (ENTER).
4
Follow the instructions in the menu for
interactive operations.
Refer to the operation details supplied with the
disc, as the operating procedure may differ
depending on the VIDEO CD.
To go back to the menu
Press O RETURN.
Notes
• You cannot use Programme Play, Shuffle Play, or Repeat
Play with Video CDs with PBC playback.
• Depending on the VIDEO CD, [Press ENTER] in step 3
may appear as [Press SELECT] in the instructions
supplied with the disc. In this case, press H.
Tip
To play without using PBC, press ./> or the number
buttons while the system is stopped to select a track, then
press H or (ENTER).
You cannot play still pictures such as a menu. To return to
PBC playback, press x twice, then press H.
Resuming playback from the point where
you stopped the disc
(Resume Play)
(DVD VIDEO, DVD-VR, VIDEO CD, Super
Audio CD, CD, DATA CD, DATA DVD only)
When you stop the disc, the system remembers the
point where you pressed x and you can start playback
from the point you stopped the disc.
1
While playing a disc, press x to stop
playback.
"Resume" appears in the front panel display.
If "Resume" does not appear, Resume Play is not
available.
2
Press H.
The system starts playback from the point where
you stopped the disc in step 1.
To enjoy a disc that is played before by resume
playback (Multi-disc Resume)
(DVD VIDEO, VIDEO CD only)
This system stores the point where you stopped the
disc for up to 40 discs and resumes playback the next
time you insert the same disc. If you store a resume
playback point for the 41st disc, the resume playback
point for the first disc is deleted.
To activate this function, set [MULTI-DISC
RESUME] in [CUSTOM SETUP] to [ON]. For
details, see "[MULTI-DISC RESUME] (DVD
VIDEO/VIDEO CD only)" (page 70).
Notes
• If [MULTI-DISC RESUME] in [CUSTOM SETUP] is set
to [OFF] (page 70), the resume point is cleared when you
change the input.
• The point where you stopped playing may be cleared
when:
– you change the play mode.
– you change or reset the settings on the Setup Display.
– you change the input.
– you disconnect the AC power cord (mains lead) for a
long period of time.
Continued
33
GB