Basic Operation - Trevi XR 120 BT Manual Del Usuario

CONTROLS
6
1. USB input
2. MicroSD memory input
3. Micro USB socket for battery charging
4. LED indicator:
Red: on during charging, off when
charging is completed.
CHARGING
The speaker must be recharged from off.
1. Using the supplied USB cable, connect the side with the Micro USB socket to the micro
USB socket (3) of the speaker and the other end to the USB port of a PC or USB charger
(5V, 1A, not included).
2. The red Led indicator (4) will light up to indicate the state of charge, when charging is
finished it will switch off.
Note: When the battery is low, the guide voice will play the warning message "Battery is low,
recharge" a few times before the device automatically turns off.

BASIC OPERATION

To turn on the speaker, long press the on / off button (7).
Press the MODE key (10, the guide item will indicate the selected function) to choose between:
- Bluetooth mode (the guide item will indicate "Bluetooth mode").
- Micro SD mode, if there is a Micro SD memory in the slot (2)
the unit will start playing music automatically (the guide voice will indicate "Play by TF
card").
- USB mode, if there is a USB type memory in the slot (1) the unit will start playing music
automatically (the guide voice will indicate "Play by USB drive").
- Radio mode (the guide item will indicate "FM mode").
- AUX IN mode ((the guide item will indicate "Aux mode").
7 8 10 9
4 3
1
5. AUX IN input
6. Button Volume- / Previous Track
7. Button On / Off
8. Button Play / Pause
9. Button Volume + / Next Track
10. Button MODE
2
5