and once the normal power conditions have been re-established, the motor does not start until the green button is
pressed.
ATENCIÓN: The three-phase DAKAR MEKANO or DAKAR400 MEKANO models leave the factory prepared to work at
400V.
ATENCIÓN: When necessary to use a three-phase power tension at 230V, we need to swap the positions of
the bridge plates in the motor terminals box, as indicated in the following figure:
ATENCIÓN: The extension cable
needs to have a minimum section
6. SEGURITY RECOMENDATIONS.
The machines with electric motor should always be
connected to a standard electrical box that has a circuit
breaker and a Residual-current device in accordance with
the characteristics of the engine ( see table).
8
ENGLISH
used to feed the machine
on the table as shown below