Storage - Silvercrest SMZC 500 C2 Instrucciones De Uso

1) Remove the power plug from the socket.
2) Dismantle the appliance for cleaning. Pull the sealing ring 6 off the lid 5.
Remove the small rubber disc located on the upper end of the blade holder 7.
3) Clean the motor unit 3 with a moist cloth. If necessary, add a little mild de-
tergent onto the cloth. Wipe off with a cloth moistened only with clear water
so that all detergent residues are removed.
4) Clean the bowl 9, emulsifying disc w, lid 5 sealing ring 6, blade holder 7
with blade 8, the small rubber disc of the blade holder 7 and the non-slip
ring q in warm water with a little mild detergent. Rinse all the parts using
clean water to remove any detergent residues. Dry all parts well.
NOTE
Alternatively, you can clean the bowl 9, emulsifying disc w, blade
holder 7 with blade 8 and the lid 5 with the sealing ring 6 in the
dishwasher. If possible, place the parts in the top basket of the
dishwasher. Ensure that the parts are not trapped in any way.
5) After cleaning, push the sealing ring 6 back onto the flange of the lid 5.
Ensure that the flat side of the sealing ring 6 rests flat on the lid 5.
6) Place the small rubber ring back on the upper end of the blade holder 7.
You can now reassemble the appliance.

Storage

■ Store the cleaned appliance in a clean and dry location.
■ 60
│ GB│MT
SMZC 500 C2