1. IMPORTANT REMARK
Congratulations! You are the owner of a carefully designed and manufactured equipment. We
thank you for having purchased our SCLAT100 mixer.
It is VERY IMPORTANT that you read this manual before connecting the mixer in order to
obtain its maximum performance.
We recommend our authorised Technical Services whenever any maintenance task should be
needed so that optimum operation shall be achieved.
2. INTRODUCTION
Since ECLER presented in 1984 the SCLAT10, in 1987 the SCLAT8 and in 1994 the SCLAT4,
the SCLAT name has been related to the reference regarding professional high performance mixers.
Renowned for its flexibility, sonic quality and reliability, the by this time third generation of SCLAT
mixers confirms ECLER as the European leader in mixing desks.
The SCLAT100 mixer combines all the requirements a technician demands from a mixing
desk regarding available features and operating safety together with the functionality DJs demand
from a high end mixer. With the SCLAT100, ECLER makes another step forward, foreseeing again
the features the market of high-end club mixers needs today.
General features
Modular mixer with maximum capacity for 8 dual-input modules
Totally modular construction
Standard 19'' rack size, 8 units high
Two standard configurations available: SCLAT100-8, 8 modules for 16 inputs and
SCLAT100-5, 5 modules for 10 inputs
Circuit boards designed with SMD (Surface Mounting Device) technology
Angled control panel (15°) for comfortable operation
3. FA50 EXTERNAL POWER SUPPLY
The SCLAT100 mixing console uses an external power supply which delivers all necessary
voltages to the mixer for its correct operation. These voltages are conveniently stabilized against
power consumption and mains voltage variations. They are also totally protected against short
circuits.
3.1. Considerations
As the FA50 is equipped with a quite powerful transformer (50VA), it has to be considered that
this can produce unwanted hum and cause thermal disturbance and electromagnetical interference
on other devices placed below or on top of the power supply. For that reasons it's recommended to
separate the power supply from electromagnetical interference sensitive devices and facilitate its
cooling. In order to protect this power supply from eventual overloads in the mains voltage or
occasional consumption peaks o the internal circuits, it features a temporized 400 mA fuse (3).
Should it ever blow up, unplug the unit from mains and replace it with an identical one. If the
new fuse blows again, DO NOT INSTALL A HIGHER RATED FUSE and contact immediately
with our Authorized Technical Service.
5