Advancing The Line Manually - Toro PowerPlex 51481 Manual Del Operador

Ocultar thumbs Ver también para PowerPlex 51481:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Advancing the Line
Manually
Remove the battery from the trimmer, then push the
button at the base of the spool retainer while pulling
on the trimmer line to manually advance the line.
Figure 13
1. Button
Adjusting the Handle
Height
1.
Loosen the lower shaft connector (A of
14).
2.
Slide the telescoping shaft to your desired
position (B of
Figure
Important:
Do not slide the upper shaft
over the vents on the lower shaft and do not
remove the rubber bumper.
3.
Tighten the handle connector to secure the
handle (C of
Figure
Figure 14
Figure
14).
14).
Adjusting the Auxiliary
Handle
1.
Release the auxiliary-handle latch (A of
15).
2.
Slide the auxiliary handle up or down to your
desired height (B of
Important:
bumper.
3.
Close the auxiliary-handle latch to secure the
auxiliary handle in place (C of
g203810
Trimming
g203805
13
Figure
15).
Do not remove the rubber
Figure
Figure 15
Figure 16
Figure
15).
g189875
g203806
Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Powerplex 51481t

Tabla de contenido