Sound Adjustment; Selecting The Sound Quality - Eq7; Customizing The Equalizer Curve; Eq7 Tune - Sony XAV-72BT Manual De Instrucciones

Ocultar thumbs Ver también para XAV-72BT:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Sound Adjustment

Selecting the sound quality
— EQ7
You can select an equalizer curve from 7 music
types ("Xplod," "Vocal," "Edge," "Cruise,"
"Space," "Gravity," "Custom," or "OFF").
1
During reception/playback, touch
"Source List," then
2
Touch "Sound."
The sound setting menu appears.
3
Touch "EQ7."
The options appear.
4
Touch the desired equalizer curve.
The setting is complete.
To cancel the equalizer curve, select "OFF."
To return to the previous display, touch "Back."

Customizing the equalizer curve

— EQ7 Tune

The EQ7 "Custom" curve allows you to make
your own equalizer settings. You can adjust the
level of 7 different bands: 62 Hz, 157 Hz,
396 Hz, 1 kHz, 2.5 kHz, 6.3 kHz, and 16 kHz.
1
During reception/playback, touch
"Source List," then
2
Touch "Sound," then "EQ7."
3
Touch "Custom," then "Tune."
The tuning display appears.
Back
ATT
EQ7 Tune : Custom
0
0
0
62 Hz
157 Hz
396 Hz
1 kHz
Reset
4
Touch +/– of each frequency to adjust
their levels.
The level is adjustable in single steps,
between –8 and +8.
To restore the factory-set equalizer curve,
touch "Reset."
5
Touch "OK."
The setting is complete.
To return to the previous display, touch "Back."
.
.
Top
0
0
0
0
2.5 kHz
6.3 kHz
16 kHz
OK
Tip
Other equalizer types are also adjustable.
Adjusting the sound
characteristics
The sound balance between left and right
speakers ("Balance") and front and rear speakers
("Fader") can be adjusted to your preference.
You can also adjust the volume level of the
subwoofer if it is connected.
1
During reception/playback, touch
"Source List," then
2
Touch "Sound."
The sound setting menu appears.
3
Touch "Balance/Fader."
The setting display appears.
Back
ATT
Balance/Fader/Subwoofer Level Adjust
4
Touch B/V/v/b to adjust the balance/
fader.
The level is adjustable in single steps between
–15 and +15 (Balance)/–15 and +15 (Fader).
5
Touch +/– to adjust the volume level of
the subwoofer.
This setting is adjustable only when a
subwoofer is connected and "Subwoofer" is
set to "ON" (page 52).
The level is adjustable in single steps,
between –6 and +6.
To return to the previous display, touch "Back."
.
Top
0
Subwoofer
Fader : 0
Balance : 0
43
Tabla de contenido

Solución de problemas

loading

Tabla de contenido