Sound Adjustment; Selecting The Sound Quality - Eq7; Customizing The Equalizer Curve - Eq7 Tune - Sony XAV-70BT Manual De Instrucciones

The items in the Bluetooth setting menu are as follows.
"Signal"*
1
Activates the Bluetooth signal: "ON," "OFF."
"Discoverable"*
Allows the other Bluetooth device to search for
this unit: "Show," "Hide."
"Device Name"*
Changes the name of this unit displayed on the
connected device. (Default setting: "Sony
Automotive")
For details on basic operation of keyboard, see
"About the keyboard to edit the name" on
page 42.
"Search"* 1 (page 35)
Searches for connectable Bluetooth devices.
"Device List"*
1 (page 36)
Shows the list of registered devices; connects to
a registered device; deletes all registrations.
"Auto Answer"*
Answers an incoming call automatically.
– "Short": to answer automatically after 3
seconds.
– "Long": to answer automatically after 10
seconds.
– "OFF": to not answer automatically.
"Ringtone"*
1 * 2
Uses the ring tone of this unit or the connected
cellular phone: "Default," "Cellular."
"EC/NC Mode" (Echo Canceller/Noise
Canceller Mode)
Reduces echo and noise in phone call
conversations.
Set to "Mode 1" normally.
If the outgoing sound quality is unsatisfactory,
set to "Mode 2" or "OFF."
"MIC Gain" (page 39)
Adjust the volume for the other party: –2 ~ +2.
"Initialize"*
1
Initializes all Bluetooth-related settings. Touch
"Yes" in the confirmation display.
*1 Cannot be configured during a handsfree call.
*2 Depending on the cellular phone, this unit's ring
tone may be output even if set to "Cellular."
Note
For details on the setting of other Bluetooth devices,
see their respective manuals.
44
1 (page 36)
1
1

Sound Adjustment

Selecting the sound quality
— EQ7
You can select an equalizer curve from 7 music
types ("Xplod," "Vocal," "Edge," "Cruise,"
"Space," "Gravity," "Custom" or "OFF").
1
During reception/playback, touch
"Source List," then
2
Touch "Sound."
The sound setting menu appears.
3
Touch "EQ7."
The options appear.
4
Touch the desired equalizer curve.
The setting is complete.
To cancel the equalizer curve, select "OFF."
To return to the previous display, touch "Back."
Customizing the equalizer curve
— EQ7 Tune
"Custom" of EQ7 allows you to make your own
equalizer settings. You can adjust the level of 7
different bands: 62 Hz, 157 Hz, 396 Hz, 1 kHz,
2.5 kHz, 6.3 kHz, and 16 kHz.
1
During reception/playback, touch
"Source List," then
2
Touch "Sound," then "EQ7."
3
Touch "Custom," then "Tune."
The tuning display appears.
Back ATT
EQ7 Tune : Custom
0 0 0
62 Hz 157 Hz 396 Hz 1 kHz
Reset
15
4
Touch +/– of each frequency to adjust
their levels.
The level is adjustable in single steps,
between –8 and +8.
To restore the factory-set equalizer curve,
touch "Reset."
5
Touch "OK."
The setting is complete.
To return to the previous display, touch "Back."
.
.
Top
0 0 0 0
2.5 kHz 6.3 kHz 16 kHz
OK
12:00