Movement LXR G4 Manual De Instrucciones página 86

OPERATIONAL INSTRUCTIONS
/
If the Heart Rate is above 60 ~ 75%, the icon and the load level number will blink on
▼
the LOAD window. The user must decrease the resistance manually. After manually
adjusting the load level, the load window stops blinking.
Within one minute, if the heart rate does not reach the target, it will start to blink again
until the user adjusts the level manually.
If there is no heart rate signal, the heart rate window should blink continuously until the
signal is picked up.
The TIME window counts down from the desired time to zero.
The user must hold the heart rate sensors for the correct operation of the program.
PROGRAM 6 – HEART RATE – 75 ~ 80%
If P6 is selected, the AGE / LOAD window displays "30" years and the HEART RATE
window displays P6. The other windows remain off.
Press or to set the age. Press START / ENTER to save the desired age and to select the
▲ ▼
next parameter.
The TIME window displays "10:00" minutes and the HEART RATE window displays P6.
The other windows remain off. Press or to set the desired time. Press START / ENTER
▲ ▼
to save the desired time and to start the program.
If the heart rate is below 75 ~ 80%, the icon and the charge level number will flash in
▲
the LOAD window. The user must increase the resistance manually. If the heart rate is
above 75 ~ 80%, the icon and the load level number will blink on the LOAD window.
▼
The user must decrease the resistance manually. After manually adjusting the charge
level, the LOAD window stops blinking.
Within one minute, if the heart rate does not reach the maximum index, it will start to
blink again until the user adjusts the level manually.
If there is no heart rate signal, the HEART RATE window should blink continuously until
the signal is picked up.
The TIME window counts down from the desired time to zero.
The user must hold the Heart Rate Sensors for the correct operation of the program.
34