Cleaning The Appliance; Cleaning And Changing The Purifying Filters - Siemens PA20001M Instrucciones De Uso

10 sec/

Cleaning the appliance

For safety reasons, you should unplug the
appliance from the mains electricity supply
before cleaning.
The appliance can be cleaned with a cloth
or sponge, slightly warm water and a mild
detergent.
Never use hot water (more than 40ºC),
bleach, benzene, petrol, acid, scouring
pads, brushes or strong detergents. Prevent
water from entering the appliance.
Do not clean the appliance with a hose..
Cleaning and changing the purifying
filters
To change the purifying filter, it is first
necessary to open the front flap on the
appliance (it is not necessary to remove it).
Pull the flap gently to do this. The flap can be
opened up to the safety stop without risk of
falling, Fig. 18.
Instructions for Use
Cleaning and Maintenance
43
The times and functions set on the timer
remain active and the programmed
operation is repeated every day at the set
times until deactivated or cancelled as
described above.
Fig. 18
All models are fitted with a basic filter which
needs to be cleaned regularly, Fig. 19. The
filter is accessed by pressing the tab at the top
and removing it from its housing, Fig. 20. The
filter is cleaned under a cold tap, dried and
replaced.
Washable
basic filter
Fig. 19