LG WM2140CW El Manual Del Propietario página 17

H ow to use washer
Each cycle has preset settings that are selected
automatically. You may also customize the
settings using the cycle setting buttons. Press
the button for that setting until the indicator light
for the desired value is lit.
The washer automatically adjusts the water level
for the type and size of wash load for best
results and maximum efficiency. It may seem
there is no water inside the drum in some
cycles, but this is normal.
NOTE: To protect your garments, not every
wash/rinse temperature, spin speed, soil level,
or option is available with every cycle. See the
Cycle Guide for details.
WASH/RINSE
Selects the wash and rinse
temperature combination for the
selected cycle. Press the
WASH/ RINSE button until the
indicator light for the desired
setting is lit.
• Your washer features a heating element to
boost the hot water temperature for Extra Hot
settings. This provides improved wash
performance at normal water heater settings.
• Select the water temperature suitable for the
type of load you are washing. Follow the fabric
care label for best results.
• Warm rinses are regulated at approximately
86°F (30°C).
• Warm rinses leave the loads drier than cold
rinses. Warm rinses can increase wrinkling.
• In cold climates, a warm rinse makes the load
more comfortable to handle.
• Cold rinses use less energy, and the rinse
temperature depends on the cold water at the
faucet.
CYCLE SETTING BUTTONS
SPIN SPEED
The washer drum spins at up to
1,100 RPM.
This extracts more water from
clothes, reducing drying time
and saving energy.
Press the SPIN SPEED button
until the indicator light for the desired setting is
lit. Some fabrics, such as delicates, require a
slower spin speed.
SOIL LEVEL
Adjusts the selected cycle to
allow more time for heavily
soiled clothes or less time for
lightly soiled clothes.
Press the SOIL LEVEL button
until the indicator light for the
desired setting is lit.
SIGNAL
Adjusts the end-of-cycle signal
volume or turns it off.
17