Turning On And Off; Switching To Standby Mode - signia Motion Charge&Go Nx Manual Del Operador

Turning on and off
You have the following options to turn your hearing
instruments on or off.
Via charger:
Turning on: Take the instruments out of the charger.
X
The startup melody is played in your hearing
instruments. The default volume and hearing
program are set.
Turning off: Place the hearing instruments in the
X
charger.
Note that the charger must be connected to the power
supply. For details refer to the charger's user guide.
Via push button:
Turning on: Press and hold the push button until the
X
startup melody starts to play. Release the push button
while the melody is playing.
The default volume and hearing program are set.
Turning off: Press and hold the push button for
X
several seconds.
See also the tips for charging in the charger's user guide.
12
Switching to standby mode
Via remote control or smartphone app, you can switch
your hearing instruments to standby mode. This mutes
the hearing instruments. When you leave standby mode,
the previously used volume and hearing program are set.
Note:
●
In standby mode, the hearing instruments are not
turned off completely. They draw some power.
Therefore we recommend to use standby mode only
for a short period of time.
●
If you want to leave standby mode, but the remote
control or app is not at hand: Turn your hearing
instruments off and on again (via push button or by
shortly placing them in the charger until one or more
orange LEDs light up). In this case, the default
volume and hearing program are set.
13