SEVERIN PG 8538 Instrucciones De Uso página 14

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 29
∙ Always remove the plug from the wall
socket
- before fi lling the grill pan with water,
- after use,
- in case of any malfunction, and
- during cleaning.
∙ The use of an extension-lead reel causes
a loss of power, possibly combined with
a subsequent heat build-up in the cable.
It is therefore necessary to unwind the
cable completely if a cable reel is used.
Make sure that the reel is approved for
outdoor use by the manufacturer.
∙ Caution: Do not move the grill when it
is in use. Before carrying, transporting
or storing the grill, ensure that is has
suffi ciently cooled down. Pour out any
remaining water after use.
∙ Ensure that the grill is not stored
outdoors, or in any other location where
it might be subjected to extremes of
temperature or high humidity.
∙ No responsibility is accepted if damage
results from improper use, or if these
instructions are not complied with.
∙ This barbecue grill is intended for
domestic use only and not for commercial
applications.
∙ In order to avoid hazards, and to comply
with safety requirements, repairs to this
electrical appliance or its power cord
must be carried out by our customer
service. If repairs are needed, please
send the appliance to our customer
service department (see appendix).
∙ This product complies with all binding CE
labelling directives.
14
Heating element
The junction box contains a safety switch.
Place the heating element into the grill pan.
The safety switch is activated automatically
when the heating element has been properly
fi tted. If not fi tted correctly, the appliance
can not be switched on.
Before using for the fi rst time
∙ Remove any packaging materials from
the appliance.
∙ Clean the grill rack and grill pan with
warm soapy water; wipe thoroughly dry
afterwards.
∙ Grill assembly:
∙ Place the heating element into the grill
pan.
∙ Fit the grill rack on top.
∙ If required, additional accessories may be
fi tted according to the diagram.
∙ Fill the grill pan with water up to the 'Max'
marking.
∙ Insert the plug into a suitable earthed
power-outlet.
∙ Let the grill heat up for approximately
10 minutes without any food on the
rack. This will lessen the smell typically
encountered when fi rst switching on a
new grill (a slight smell and a little smoke
may be emitted).
Grilling
∙ The grill pan must be fi lled with water up
to the 'Max' marking.
∙ Height-adjustable models:
When cooking delicate foods, the rack
should be adjusted to its highest position.
Tabla de contenido
loading

Este manual también es adecuado para:

Pg 8539Pg 8542Pg 8544Pg 9710

Tabla de contenido