Medisana MC 820 Instrucciones De Manejo página 35

Buttons on the control unit
Use the buttons on control pad
Switch on the device by pressing On/Off button
The device starts with standby mode. If no other button is pressed, the
device turns off after 15 minutes automatically.
8
Demo button
You may activate demo function with or without pressing On/Off button
before. Press the Demo button
introduction of different back setting with different functions. First mas-
sages in neck/shoulder are presented by rotating neck/shoulder massage
2
heads , to be added directly by full back region massages. The rota-
ting back massage heads
to the entire top. Simultaneously heat in the back and vibration in the
seat are activated, while intensity of vibration is set on highest level. The
LEDs show the current massage regions and functions. The device will
stop once all functions worked.
0
Neck button
Switch on the device by pressing On/Off button
the neck/shoulder reversible kneading massage. Press this button once,
2
left massage head is kneading counterclockwise; right massage head
2
is kneading clockwise. Press it a second time, directions change.
0
Press button a third time, neck massage stops.
Adjust buttons (▼ ▲ )
Activate the neck massage function by pressing the neck button
q
the Adjust buttons
2
heads . Press and hold the ▼ or ▲ button until the favoured position
is reached.
Shiatsu Massage button
Switch on the device by pressing On/Off button
massage function by pressing the Shiatsu massage button
region you wish to massage with the back massage button (
z
Lower button (lower back)
The Shiatsu massage heads
back in a circular motion. The reversal of the direction takes place
when the respective end positions are reached.
u
Upper button (upper back)
The Shiatsu massage heads
back in a circular motion. The reversal of the direction takes place
when the respective end positions are reached.
i
Full button (full back)
The Shiatsu massage heads
of the backrest, up to the shoulder area, massaging the back in a circular
motion whilst doing so. Once the uppermost position has been reached,
the direction of the massaging heads is reversed and the heads then
travel down to the base of the backrest.
7
to operate the massage seat cover:
8
, the device starts automatically with
3
move from the entire bottom (start position)
q
to position the height level of the neck massage
t
3
travel up and down the lower half of the
3
travel up and down the upper half of the
3
move from the "Park" position at the base
3 Operating
9
. The LED illuminates.
9
9 0
. Neck button is for
0
. Use
9
. Activate the Shiatsu
t
. Select the
z u i
/ / ).
21
GB
i
i
i
i
i
i
i
i
i
i
i
i
i