Battery Change Indicator - Microlife Deluxe BP3GX1-5N Rexnord

5.9.

Battery change indicator

Batteries almost discharged
When the batteries are approximately 75% used, the
battery symbol will flash a few times as soon as the
instrument is switched on (if at least one of the batter-
ies still has some charge). Although the
instrument will continue to measure reliably, you
should obtain replacement batteries.
Batteries discharged – replacements required
When the batteries are discharged, the battery symbol
will appear, unblinking, as soon as the instrument is
switched on. You cannot take any further measure-
ments and must replace the batteries.
1. Open the battery compartment on the bottom of the
instrument.
2. Replace the batteries – ensure they are correctly
connected, as shown on the symbols in the
compartment.
3. The memory retains all values although date and
time (and possibly also set alarm times) must be
reset – the year number will flash automatically
after the batteries are replaced.
4. To set date and time, follow the procedure
described in Section 4.2.
Note:
Use four new, Long-Life 1.5 V AA batteries. Do not use
batteries beyond their expiration date. If the monitor is
not going to be used for a prolonged period, the batter-
ies should be removed.
23