Charging The Battery - Taurus HC-0150 Manual Del Usario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
SERVICE:
- The appliance has been oiled in origin, in order to maintain the
appliance in good operation conditions we suggest greasing the
blades every time you clean it by putting a few drops of oil on the
ends of the blade, and finally switching on the appliance during a
few seconds.
- Make sure that the appliance is serviced only by specialist per-
sonnel, and that only original spare parts or accessories are used
to replace existing parts/accessories.
- Any misuse or failure to follow the instructions for use renders the
guarantee and the manufacturer's liability null and avoid.
DESCRIPTION
A
Blades.
A.1
Inner pivoting Blade.
B
Appliance body.
C
On/off switch.
D
Pilot light.
E
Comb guide size (3-18).
F
Comb height selector.
G
Blade release button.
H
Cleaning brush.
I
Lubricating oil.
J
Comb.
K
Battery charger.
If the model of your appliance does not have the accessories des-
cribed above, they can also be bought separately from the Technical
Assistance Service.

CHARGING THE BATTERY:

- Caution: a new battery is not fully charged and must therefore be
charged before the appliance is used for the first time.
- Charge the battery at an atmospheric temperature of between 4
and 40ºC.
- Connect the charger to the jack using the socket on the applian-
ce. The socket is located at the lower/back part of the appliance.
- Plug the charger (K) into the mains.
- The pilot light (D) will light red during charging, once it is 100%
charged, the light will turn off.
Tabla de contenido
loading

Tabla de contenido