Loewe Xelos Rack Instrucciones De Montaje página 10

Fabric hose
In the course of further development of our products you can obtain the fabric hose,
fi g. 5, arrows, in the desired length from your dealer or our after-sales service.
Fabric hose / cable hose in colour black
Part number: 31947 004
Fabric hose / cable hose in colour silver
Part number: 31947 005
You have the possibility to lay your cables which emerge from the rack in this fabric
hose. This looks a lot more elegant.
The diameter of the fabric hose increases when you push the ends together. This
makes it easier to push through the cables with plugs.
Connect the ends of the cables to the appropriate connections.
Perform a function check of the equipment.
Mounting the cable covers
Attention!
Do not reach into the recess at the bottom of the metal
cover for the Xelos A 42 Rack. You could get your fi ngers
crushed when pushing it into the groove in the Rack.
Hold the metal cover with both hands on the right and left and push it
into the groove.
Push the cover for the top of the cable duct on the rack into the cable
recess on the rack fi rst. Then snap the cover into the holders on the
Rack.
Then refi t the connection cover to the rear of the screen in reverse
order (Xelos SL 32/ 37 and Xelos A32/ 37).
You can rotate your screen about 30° to the right and left on the Rack.
Make sure the area of rotation is free.
Cleaning
Clean the equipment combination with a damp, soft, clean
cloth (without any aggressive or abrasive cleaning agents).
10
fi g. 5
These cable lengths (fi g. 5, arrows) should be
fi tted with a fabric hose.
You can cut the fabric hose into pieces of the
appropriate length with a pair of scissors.