Medisana TENS TDP Instrucciones De Manejo página 41

Defi ne TENS
program
Defi ne the EMS
program
You can defi ne a normal program (U-01) and a burst program (U-02) yourself
in TENS mode for individual therapy. The following parameters are saved in
the process:
• Duration of the therapy
• Frequency
• Pulse width
1. Select TENS therapy mode (see page 33).
2. Select one of the user programs U-01 or U-02 (see page 33).
3. Briefl y press the button
4. With one of the controls
minutes).
5. Briefl y press the button
6. Set the desired frequency with one of the controls
• Normal program (U-01): 2 to 120 Hz
• Burst program (U-02): 0.2 to 5.0 Hz
7. Briefl y press the button
8. With one of the controls
9. Briefl y press the button
This program has now been saved and can be used like a preset program (see
page 33 and 34).
In EMS therapy mode, you can defi ne a program yourself and save the follow-
ing parameters:
• Therapy duration
• Frequency
• Pulse width
• Increase/decrease time – Current intensity increases from zero to the de-
fi ned value or drops back to zero during this time.
• Continuous time – Current intensity is held.
• Pause time – pause for recovery.
Continuous time
Time
1. Select EMS therapy mode (see page 33).
2. Select the user program U-01 (see page 33).
3. Briefl y press the button
blink.
4. With one of the controls
minutes).
5. Briefl y press the button
6. With one of the controls
7. Briefl y press the button
width.
"Set". The display for the therapy duration
or set the desired therapy duration (10 to 90
"Set". The display for the frequency
"Set". The display will now display the pulse width.
or , set the desired pulse width (50 to 300 μS).
"Set".
Relax time
"Set". The display of the therapy duration
or , set the desired therapy duration (10 to 90
"Set". The display for the frequency
or set the desired frequency (2 to 120 Hz).
"Set". The display
Application
will blink.
will blink.
or :
will blink.
will now show the pulse
GB
will
35