Tripp-Lite AG-013B Serie Manual Del Propietário página 4

2. Installation
2.2 Mounting the Power Strip
Note: Mounting buttons come pre-installed on the
Power Strip for toolless mounting. A second set of
button mounting holes on the Power Strip allow
alternate positioning in the rack.
Position the Power Strip as desired within the
rack enclosure, align the buttons with the rack
mounting slots and slide the Power Strip
downward into position.
Your model may differ slightly from image.
2.3 Connecting the Power Strip to the ATS
The power strip has a 7 conductor cord with an
8-position plug. The plug connects directly to
the ATS mating receptacle on the back of the
unit.
Your model may differ slightly from image.
4
15-01-272-9333FB.indb 4 8/26/2015 10:04:12 AM