Complete The Installation - Kohler K-2313 Guia De Instalacion

Sealant
As Viewed From Below
5. Install the Lavatory to the Countertop/Vanity
CAUTION: Risk of product damage. Do not use plumbers putty with this product. Plumbers putty
can cause permanent discoloration of product surfaces. Silicone sealant is required for the installation.
Make sure the countertop/vanity surface is clean and dry.
Temporarily position the lavatory on the countertop/vanity cut-out. Lightly mark the outline with a
pencil.
NOTE: If installing the lavatory with hole drilling, install the faucet at this time. Follow all the instructions
packed with the faucet.
Remove the lavatory and apply a continuous bead of silicone sealant around the bottom edges of
the lavatory.
Place the lavatory on top of the countertop/vanity cut-out and immediately wipe away any excess
silicone sealant.
Allow the silicone sealant to cure before proceeding.

6. Complete the Installation

Install the bracket covers according to the installation instructions packed with the bracket kit.
Install the lavatory drain according to the installation instructions packed with the drain.
Connect the supplies, trap, and drain assembly.
Turn the water supplies on and check for leaks.
1012579-2-D
Wall-Mount Vanity
6
Lavastone
Countertop
Kohler Co.