Dehumidification - BALAY 3XM170B Instrucciones De Uso

Instructions for Use
Do not form sharp bends when
positioning the tube, otherwise the
correct expulsion of hot air may be
impeded. This may cause a reduction in
the cooling power and performance of
the appliance.
In order to achieve maximum cooling
efficiency and minimum noise levels,
the expulsion tube should be fitted
above the total height of the appliance,
Fig. 19.
90°
Fig. 19

Dehumidification

In position the appliance reduces the
humidity in the atmosphere.
• Set the thermostat to its minimum
temperature setting, Fig. 20.
Fig. 20
• Place a bowl at the drainage pipe outlet
and remove the plug to collect the
condensed water, Fig. 21.
Fig. 21
• Remove the diffusion duct and set the
air expulsion tube to the position shown
in figure 22.
• The expulsion tube may also be totally
dismantled if desired.
Fig. 22
0°
• Lift the air director on the top of the
appliance. This air director is not
installed on the appliance on 3XM181E
models. See figures 25 and 26 in
"Heating".
• Select the dehumidification function
on the control knob, Fig. 23.
Fig. 23
Warning!
The amount of dehumidified water may
reach a maximum of 36 litres in 24
hours, depending on ambient
conditions. See "Technical Information".
Do not forget to replace the plug onto
the water drainage pipe when you
change function, otherwise the
42