BALAY 3XM170B Instrucciones De Uso página 40

Instructions for Use
• The sliding window/balcony installation
accessory can also be used (See
"Description of accessories"), Fig. 15 :
a, b, c, d. This accessory can be used
for both horizontal and vertical windows
/ balconies.
a
b
a
c
d
Fig. 15
• The accessory has two holes on the side
to fit it to the window / balcony with. The
user can secure it to the frame or wall
with two screws (not included with the
accessory) to prevent it from moving or
falling out of place, Fig. 16.
Fig. 16
Permanent installation
Permanent installation is performed using
the wall grommet window See
"Description of accessories".
• To expel hot air through the wall, it is
necessary to make a hole in the wall and fit
the wall grommet, Fig. 17.
Fig. 17
24 - 38 cm.
• Remove the diffusion sleeve and connect
the air expulsion tube to the accessory.
• If permanent installation is to be
performed through the window, then it is
only necessary to use the transparent
end piece on the accessory. A 10.5-cm
diameter hole needs to be cut in the
glass, Fig. 18.
Fig. 18
Notes:
Do not extend the hot air expulsion
tube more than necessary (maximum
length; 140 cm).
Do not form sharp bends when
positioning the tube, otherwise the
41