Periodic Maintenance - SEA SATURN 600 Manual Del Usuario

Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888
1 6 . S A F E T Y A N D E N V I R O N M E N TA L
COMPATIBILITY:
Don't waste product packing materials and/or circuits.
When being transported this product must be properly
packaged and handled with care.
SEA reserves the right to do changes or variations that may be
necessary to its products with no obligation to notice.

17. PERIODIC MAINTENANCE

Check the oil level (where present)
(Use the oil level rod)
Change oil
Check the release functionality
Check the clutch functionality
(where present)
Check the distance between pinion and gear
rack (1.5 mm)
Check the usury status of pinion and
gear rack
Check the fixing screws
Check the connection cables integrity
Check limit switch functionality and status in
opening and closing and the related
small plates
All the above described operations must be done exclusively by
an authorized installer.
®
Annual
4 years
Annual
Annual
Annual
Annual
Annual
Annual
Annual
Page for both instaler and user
18. RELEASE SYSTEM FOR SATURN AND
BOXER
18.1. In order to release do as follows:
-Open the lock cover, insert the key and rotate it 90° clockwise
(Fig. 27).
- Pull the release lever until it stops, about 90° approximately
(Fig. 28).
Note: when you pull the release lever, the electronic control
unit receives a stop impulse thanks to a micro-switch
placed inside.
18.2. In order to relock do as follows:
- Push the release lever to complete closing.
- Rotate the key counter-clockwise and extract it.
- Close the protective lock cover.
Once the lock has been restored the electronic control unit
reactivates
C l o s e
O p e n
Fig. 27
Fig. 28
ENGLISH
15