Operating Instructions - Flex L 7-12 115 Manual De Instrucciones

L 7-12 115 / L 8-11 125 / L 10-11 125 / L 14-11 125 / LE 14-11 125

Operating instructions

WARNING
Risk of electric shock! Before carrying out
any work on the power tool, always
disconnect the tool from the power supply.
Before switching on the power
tool
Unpack the power tool and check that there
are no missing or damaged parts.
Assembly
Attach the guard
WARNING
Risk of injury!=When using the angle grinder
for roughing or cutting, never work without
the guard. A special cutting guard must be
used for cutting.
See manufacturer's accessories catalogue
for the appropriate cutting guard.
1. Disconnect the tool from the power
supply.
2. Attach the guard (1.). Lugs on the guard
hood must be located in the flange
recesses.
3. Turn guard hood clockwise (2.).
Rotation is possible in one direction only!
4. Remove in reverse order.
Attach the side handle
It is not permitted to operate the power tool
without the handle.
Handle can be fitted to the left or right of the
tool.
Attaching/changing the grinding
wheel
Attach the grinding wheel
1. Disconnect the tool from the power
supply.
2. Press and hold down the spindle lock (1.).
Instruction manual
NOTE
11