Operating Instructions - Flex L1109FE Instrucciones De Funcionamiento

Angle grinder L1109FE, L1710FRA, L1710FRC
n If angle grinders are used outdoors or are
exposed to extreme metal dusts, connect
via a residual-current-operated circuit-
breaker (tripping current maximum
30 mA).
n Use only extension cables permitted
for outdoor use.
n Mark the angle grinder with adhesive
labels only. Do not drill any holes into
the housing.
n Regularly clean ventilation slots.
(EQEKI XS TVSTIVX]
n The mains voltage and the voltage
specifications on the rating plate (12)
must correspond.
n Do not press the spindle lock (4) until
the grinding tool stops.

Operating instructions

(ERKIV
Before switching on the angle
grinder
Unpack the angle grinder and check that
there are no missing or damaged parts.
Switch on and off
Brief operation without engaged
switch rocker:
– Push the switch rocker (6) forwards
and hold in position.
– To switch off the power tool, release the
switch rocker (6).
Continuous operation with engaged
switch rocker:
'EYXMSR
Following a power failure, the switched-on
machine will start running again.
– Push the switch rocker (6) forwards and
engage by pressing the front end.
17