DHC BT1000 El Manual Del Propietario página 7

3. Press the ◄ ► key to select the battery type:
4. Press «ENTER» to confirm choice.
5. Press the ◄ ► key to select the battery rating:
CCA/SAE, EN, JIS, DIN, IEC, & CA/MCA.
6. Press «ENTER» to confirm choice.
7. Press the ◄ ► key to input the battery
capacity.
CCA/SAE: 40~2000
EN: 40~1885
DIN: 25~1120
IEC: 30~1320
JIS: By Battery Type No.
CA/MCA: 50~2400
8. Press the ◄ ► key to confirm temperature.
9. Press <<Enter>> to begin the test.
*Return Feature: Before the test is started, the user can always return to
the previous setting page by pressing <<ENTER>> for 2 seconds.
SURFACE CHARGE NOTICE:
The battery will hold a surface charge if the engine has been running or after
the battery has been charged. The tester may prompt you to remove the
surface charge.
A. Follow the instructions indicating when to turn the headlights on and off or
apply a load into the battery.
IN VEHICLE:
SURFACE CHARGE
IN VEHICLE? YES
BATTERY TYPE:
AGM FLAT PLATE
SELECT RATING:
SELECT CAPACITY:
ABOVE 32°F/0°C?
TURN HEADLIGHTS
ON FOR 15 SECS
7
7
CCA/SAE
560CCA/SAE
YES/NO