System Test - DHC BT1000 El Manual Del Propietario

What is the "Test Code"? How to use it?
A. Put the CD into CD or CD/DVD/BLUE RAY combination drive.
B. Follow the installation instructions and install the icon named "BT/RTxxx"
and the sheet below will pop up then input the "Test Code" into the chart
manually or by barcode scanner.
C. Test results will show up in the chart after decoding as below.
D. The test data can be stored in the PC.
16. Press the ◄ ► key to select result printing:
YES or NO. Press «ENTER» to confirm your
choice.
*24V System Test Printing: The printer will
not function for 24 Volt batteries system
test printing. The 24V system test result
will be recorded till you hook up to a 12V
battery and the right screen shows up. Please select "YES" and press
enter key to print the result and then disconnect the clamps. The screen
will appear again after you reconnect the clamps. Please select "NO" and
press the enter key to go back to the main menu.
17. Press «ENTER» return to MAIN MENU or remove the test clamps from the
battery posts after completion of testing batteries to end test.

SYSTEM TEST:

PRINT RESULT?
PRINT 24V SYSTEM
RESULT?
10
10
YES/NO
YES