JVC KD-A815 Manual De Instrucciones página 12

~
Ÿ
USB input
terminal
All tracks will be played repeatedly until you change the source or detach the USB device.
If you have turned off the power (without
detaching the USB device)...
Pressing / SOURCE turns on the power and
playback starts from where it has been stopped
previously.
• If a different USB device is currently attached,
playback starts from the beginning.
Stopping playback and detaching
the USB device
Straightly pull it out from the unit.
"No USB" appears. Press / SOURCE to listen to
another playback source.
You can operate the USB device in the same
way you operate the files on a disc.
( 10, 11)
• You can listen to WAV files by following the
MP3/WMA file operations. (
Cautions:
• Avoid using the USB device if it might hinder
your safety driving.
• While "Reading" is shown on the display:
– Do not pull out and attach the USB device
repeatedly.
– Do not pull out or attach another USB
device.
12 ENGLISH
] Turn on the power.
USB memory
• Do not start the car engine if a USB device is
connected.
• This unit may not be able to play the files
depending on the type of USB device.
• Operation and power supply may not work as
intended for some USB devices.
• You cannot connect a computer to the USB
input terminal of the unit.
• Make sure all important data has been backed
up to avoid losing the data.
• Electrostatic shock at connecting a USB
device may cause abnormal playback of the
device. In this case, disconnect the USB device
then reset this unit and the USB device.
• Do not leave a USB device in the car, expose
to direct sunlight, or high temperature to
avoid deformation or cause damages to the
device.
• Some USB devices may not work immediately
10, 11)
after you turn on the power.
• The detect time and response time may
be very long for some USB devices (such as
Digital Audio Player, etc.).
• For more details about USB operations,
USB cable from the
rear of the unit
and / or
37, 38.