How To Install Your Canopy Housing - Fanimation PROP LP8323LBN Manual De Instrucciones

How to Wire Your Ceiling Fan (continued)
GRAY
YELLOW
RED
BLACK
4. After connections have been made and put the white and green leads to one side and the black/white leads
towards the other side, the connection should be turned upward and carefully push leads into the outlet box.
The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one
side of the outlet box and the ungrounded conductor on the other side. (Figure 5)
NOTE: This step is applicable after the neccessary wiring is completed.
1. Assemble canopy by rotating key slot in canopy over
shoulder screw in hanger bracket
the wires. Tighten shoulder screw. Fully assemble and
tighten second shoulder screw that was previously
removed. (Figure 1)
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the canopy
housing and not pinched between the housing and the
ceiling.
2. Securely attach and tighten the canopy screw cover
over the shoulder screws in the hanger bracket utilizing
the keyslot twist-lock feature. (Figure 2)
BLK-ANT
GREEN / YELLOW
- Ground wire (2)
From Receiver
Listed
Outlet Box
GREEN-Ground Wire
WHITE
From Hanger Bracket
GREEN-Ground Wire
From Hanger Ball

How to Install Your Canopy Housing

and care not to pinch
WARNING
Green Wire
from Supply
(Ground)
Green Wire
from Hanger
Bracket (Ground)
Green Wire
GREEN-
from Receiver (2)
Ground wire
(Ground)
From Ceiling
Green Wire
from Hanger
Ball (Ground)
Figure 5
11
White Wire
Listed
from Supply
Outlet Box
White Wire
from Receiver
Black Wire
from Supply
Receiver
Black/White Wire
from Receiver
Canopy
Figure 1
Canopy Screw
Cover
Figure 2
Household
Supply