How To Assemble Your Ceiling Fan Blades - Fanimation PROP LP8323LBN Manual De Instrucciones

How to Assemble
1. Remove and discard the three rubber/screws motor
stops from the motor assembly. (Figure 1)
2.
with lock washers and flat washers from the hardware
bag. Then through the holes located on the bottom of
the motor assembly. (Figure 2)
CAUTION
Do not connect fan blades until the fan is completely
installed. Installing the fan with blades assembled
may result in damage to the fan blades.
CAUTION
To reduce the risk of electric shock, disconnect the
electrical supply circult to the fan before installing
light kit.
Your
Ceiling Fan Blades
Motor Assembly
Lock Washer
1/4 -20 Screw
(2 per assembly)
HARDWARE USED:
1/4 -20
SCREW
LOCK WASHER
FLAT WASHER
12
Figure 1
Flat Washer
Figure 2
Motor Stops
Blade
x 6
x 6
x 6