Assembly - Bosch Intuvia BUI251 Instrucciones De Servicio

Technical Data
On-board computer
Product code
Max. USB port charging
current
USB port charging voltage
A)
USB charging cable
Operating temperature
Storage temperature
Charging temperature
Internal lithium-ion bat-
tery
B)
Protection rating
Weight, approx.
A)
Not included with the product as standard
B)
When the USB cover is closed
The Bosch eBike system uses FreeRTOS
(see http://www.freertos.org).

Assembly

Inserting and removing the battery
For inserting and removing the eBike battery in/from
the eBike, please read and observe the battery oper-
ating instructions.
Bosch eBike Systems
Intuvia
BUI251/BUI255
mA 500
V
1 270 016 360
°F +23 to +104
°F +14 to +122
°F +32 to +104
V 3.7
mAh 230
IP 54 (dust and
splash-proof)
lb 0.30
Inserting and removing the on-board
computer
5
(14)
(4)
(3) On-board computer
(4) Holder for on-board computer
(14) Locking mechanism for on-board computer
(15) Locking screw for on-board computer
To insert the on-board computer (3), slide it into the
holder (4) from the front.
To remove the on-board computer (3), push on the
locking mechanism (14) and slide it forwards out of
the holder (4).
When you park up the eBike, remove the on-
u
board computer.
The on-board computer can be secured in place to
prevent it from being removed from the holder. To do
this, remove the holder (4) from the handlebars. Put
the on-board computer in the holder. Screw the lock-
ing screw (15) (M3 thread, 8 mm long) from below
into the corresponding thread in the holder. Mount
the holder back on the handlebars.
Note: The locking screw is not designed to prevent
theft.
English – ​ 5
(3)
(15)
1 270 U20 XBI | (28.02.2019)