6
8. BEFORE USE
Before using the device, always check:
• That all parts of the rollator are locked in a secure manner;
• That all screws are tight;
• That the seat is properly locked;
• That the locking of the seat is correctly inserted (where present);
• The correct operation of the brake and the regular brake.
• The state of wear of the mechanical parts in play so as to ensure the use of the device in total
safety for people and things
9. ASSEMBLING INSTRUCTION
9.1 Before assembling the product
Unpack the product and check that no damage has occurred during shipping. In the event when
the rollator is damaged, please contact your nearest dealer.
9.2 Open the rollator
Open the rollator pulling the front part of the frame by leveraging on the rear legs.
9.3 Pushing handles assembly
Place the handle tubes in the frame. Turn the locking knobs until they are locked.
9.4 Adjustment of the handles
Adjust the height of the handles using the side knobs. Unscrew the knob, place the handles to the
desired height, turn the knob clockwise to tighten and fasten it again. Repeat for the other handle
and make sure that both handles are positioned at the same height.
WARNING! Make sure that the handle is in line with the direction of
movement of the rollator. If the handle does not stay straight, there is
a risk that the rollator wobbling or tipping over, especially if you push it
harder.
9.5 Folding the rollator
Make lever on the lateral bars and bring back the front of the rollator.
9.7 Bag (RP513)
The bag is attached to the frame of the rollator through the clips.
WARNING! Maximum capacity for bag 5 kg. Use the bag for small items only.
Do not overload the bag to prevent imbalances and the risk of overturning.
9.8 Seat
Before sitting, place the rollator on a flat and solid surface and then lock the brakes. Make sure
the brakes are securely locked and that the rollator is in a stable position.
WARNING! Sit down distributing your weight on the seat. Do not sit by pushing
only on one side.