Symbols; Before Use; Assembling Instruction; Before Assembling The Product - Mopedia RP675 Manual De Instrucciones

• Do not hanging anything on the rollator frame to avoid distortions of the tubes
when the rollator is open and damage the stability. Injury may also be caused by distortions;
• Take care to entrapment of fingers and / or clothing during the opening and closing.

6. SYMBOLS

Product code
S N
Unique Device Identification
CE mark
0197
Manufacturer
Batch Lot
EC REP
Read the instruction manual
Medical Device
Conditions of disposal

7. BEFORE USE

Before using the device, always check:
1. That all parts of the rollator are locked in a secure manner;
2. Check that all screws are tight;
3. Make sure that the seat is properly locked
(if that 'not press further with the power seat bottom frame);
4. Check that the locking of the seat is correctly inserted;
5. Check the correct operation of the brake and the regular brake.

8. ASSEMBLING INSTRUCTION

8.1 Before assembling the product

Unpack the product and check that no damage has occurred during shipping. In the event when the
rollator is damaged, please contact your nearest dealer.

9. ASSEMBLY

9.1 Open the rollator

Open the rollator pulling the front part of the frame by leveraging on the legs

9.2 Folding the rollator

Make lever on the lateral bars and bring back the front of the rollator.

9.3 Handles assembly

Place the handle tubes in the frame. Turn the locking knobs until they are locked. The hexagonal
hole is needed to accommodate the screw head.

9.4 Adjustment of the handles

Adjust the height of the handles using the side knobs. Unscrew the knob, place the handles to the
desired height, turn the knob clockwise to tighten and fasten it again. Repeat for the other handle
and make sure that both handles are positioned at the same height.
5