General Power Tool Safety Warnings - Makita DHS680 Manual De Instrucciones

ENGLISH (Original instructions)
1. Button
2. Red indicator
3. Battery cartridge
4. Indicator lamps
5. Check button
6. Switch trigger
7. Lock-off lever
8. Battery indicator
9. Mode indicator
10. Lever
11. Depth guide
12. Front lever
13. Stopper
14. Cutting line (0° position)
SPECIFICATIONS
Model
Blade diameter
Max. cutting depth
No load speed
Overall length
Net weight
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heaviest
combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING:
• Only use the battery cartridges and chargers listed above. Use of any other battery cartridges and chargers may
cause injury and/or fire.
Intended use
The tool is intended for performing lengthways and
crossways straight cuts and mitre cuts with angles in
wood while in firm contact with the workpiece. With
appropriate Makita genuine saw blades, other materials
can also be sawed.
General power tool safety
warnings
WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this
6
Explanation of general view
15. Cutting line (45° position)
16. Screw
17. Lamp
18. Hook
19. Close
20. Open
21. Hex wrench
22. Shaft lock
23. Tighten
24. Loosen
25. Inner flange
26. Saw blade
27. Outer flange
28. Hex bolt
at 0°
at 45°
at 50°
BL1815N/BL1820/BL1820B/BL1830/BL1830B/BL1840/BL1840B/BL1850/
DC18RC/DC18RD/DC18RE/DC18SD/DC18SE/DC18SF
power tool. Failure to follow all instructions listed below
ENE078-2
may result in electric shock, fire and/or serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
GEA010-2
29. Mounting shaft
30. Ring
31. Dust nozzle
32. Vacuum cleaner
33. Hose
34. Clamping screw
35. Rip fence (Guide rule)
36. Adjusting screw for 45°
37. Adjusting screw for 0°
38. Triangular rule
39. Bevel guide
40. Guide
DHS680
165 mm
57 mm
41 mm
37 mm
-1
5,000 min
350 mm
3.0 - 3.3 kg
D.C. 18 V
BL1850B/BL1860B