Maxon T-340 Instrucciones página 14

1. Bolt a reinforcement angle (Kit item) to RH
and LH mounting brackets (Kit items) as
shown in FIG. 14-1.
NOTE: Holes for mounting brackets are
marked and drilled only after lift-
gate is in correct position on the
pickup bed.
2. Position the LH and RH mounting brackets
(Kit items) in the pickup bed just forward
of corner posts (FIG. 14-2).
3. Position liftgate in the rear opening of the
pickup bed (FIG. 14-2).
pickup bed
spare tire tube on truck
pickup bed
NOTE: Ensure nuts and lock washers
are on the inboard side of the
mounting brackets.
4. Bolt the main frame brackets on liftgate,
to the RH mounting brackets as shown
in FIG. 14-2. Handtighten bolts and nuts.
Repeat for LH mounting bracket.
5. Let liftgate hang, in the rear opening of
pickup bed, with support from corner
posts.
LIFT CORPORATION Sht. 14 of 58 DSG#
INSTALLING LIFTGATE
MOUNTING
BRACKET
3/8" LOCK
WASHER
BOLTING REINFORCEMENT ANGLE
RH MOUNTING
BRACKET
MAIN FRAME
LH BRACKET
BOLTING LIFTGATE TO RH
MOUNTING BRACKET
M-15-25
Rev. E Date: 08/13/19
3/8"-16 X 1" LG
3/8"-16 NUT
TO MOUNTING BRACKET
FIG. 14-1
CORNER
POST
3/8" X 1" BOLT
(3 PLACES)
3/8" FLAT WASHER
3/8" NUT
(3 PLACES)
LIFTGATE
FIG. 14-2
REINFORCEMENT
ANGLE
BOLT
3/8" FLAT
WASHER
MAIN FRAME
RH BRACKET
(3 PLACES)