First Use; Lighting; Cooking - Master Forge CBC830L Manual Del Usuario

OPERATING INSTRUCTIONS
This appliance is designed for use only with quality charcoal briquettes, lump charcoal and cooking wood.
Never use charcoal that has been pre-treated with lighter fluid. Use only a high grade plain charcoal,
charcoal/wood mixture, lump charcoal or cooking wood.

First Use

. Make sure all labels, packaging and protective films have been removed from the grill.
2. Remove manufacturing oils before cooking on this grill for the first time, by operating the grill for at least 5 minutes with the lid
closed. This will "heat clean" the internal parts and dissipate odors.

Lighting

Check to make sure the air vents are free of debris and ash before using the grill.
Make sure ash catcher is empty and securely and completely in place before using the grill.
. Open lid and vents.
2. Make sure ash receiver is empty and secure.
3. Remove cooking grid.
4. Arrange charcoal briquettes or other fuel on the charcoal grid.
5. Light per instructions on fuel package.
6. Allow fuel time to ash into glowing coals before cooking.
When using a liquid starter always check ash catcher before lighting. Fluid can collect in the ash
receiver and could ignite resulting in a fire below the bowl.
Never add lighting fluid to hot or even warm coals as flashback may occur causing serious injury or
damage to property.
Direct Cooking
Cooking directly over hot coals is ideal for searing in juices and grilling food requiring less than 25 minutes of grilling time, such as
steaks, hamburgers, hot dogs, chicken parts, vegetables and fruit.
. Open lid and remove cooking grid.
2. Load and light charcoal per "Lighting" section. Leave lid open.
3. While wearing protective gloves, carefully spread hot coals evenly across charcoal grid with a long handle tool.
4. While wearing protective gloves replace cooking grid, close lid and allow grill to preheat.
5. While wearing protective gloves open lid and place food onto cooking grids above the hot coals with long handle tongs.
6. With lid open or closed, cook until desired internal food temperatures are achieved.
Note: If additional briquettes are needed, remove food from cooking grid and while wearing protective gloves remove the cooking
grid and place additional briquettes without disturbing the hot coals. Carefully replace cooking grid and food.
7. Allow charcoal to burn out by closing lid and all vents. Except in the case of an emergency, do NOT pour water on hot coals.
Indirect Cooking
Not cooking directly over hot coals is ideal for slow cooking and grilling foods requiring more than 25 minutes such as most roasts,
loins, chops, whole chickens, turkey, fish and baked goods.
. Open lid and remove cooking grid.
2. Load and light charcoal per "Lighting" section. Leave lid open.
3. While wearing protective gloves, carefully spread hot coals to the outsides of charcoal grid with a long handle tool.
4. While wearing protective gloves replace cooking grid, close lid and allow grill to preheat.
5. Wear protective gloves to open lid. Use long handled tools to place food onto cooking grids above the areas without hot coals.
6. With lid closed, cook until desired internal food temperatures are achieved.
Note: If additional briquettes are needed, remove food from cooking grid and while wearing protective gloves remove the cooking
grid and place additional briquettes without disturbing the hot coals. Carefully replace cooking grid and food.
7. Allow charcoal to burn out by closing lid and all vents. Except in the case of an emergency, do NOT pour water on hot coals.
For more tips on indirect cooking please see "Tips for Better Cookouts and Longer Grill Life".
CAUTION
CAUTION
CAUTION
CAUTION
WARNING
0