Disposal; Troubleshooting - Krups BeerTender VB2158 Manual Del Usuario

English
DIsPosaL aND ENVIRoNmENT PRoTECTIoN
To prevent possible harm to the environment or human health from uncontrolled
n
waste disposal, recycle it responsibly to promote the sustainable reuse of
material resources. To return your used device, please use the return and
collection systems or contact the retailer where the product was purchased.
They can take this product for environmental safe recycling.
appliances that are no longer used should be rendered unusable.
n
Unplug the appliance and cut the power cable.
n
appliances no longer in use must be taken to a suitable waste collection
n
facility so that the special components contained in the appliance may be
duly disposed of.
The "TEm – module" (or Peltier's cell) must be disposed of in accordance
n
with the regulations currently in force in the user's country.

TRoUBLEshooTING

Problem
The appliance does not
come on.
you cannot position the
tap cover correctly.
No beer is being
dispensed.
30
otice_krups_beertender.indd 30
This marking indicates that this product should not be disposed with
n
other household wastes throughout the EU.
Possible causes
The appliance is not
connected to the mains
power supply.
The BeerTender Keg
tap has been activated
by hand.
The BeerTender Keg
tap or tube is not
inserted
correctly.
The BeerTender Keg is
empty.
There is no keg inside
the BeerTender
appliance.
The BeerTender
appliance tap handle is
not correctly installed/
positioned.
remedies
Connect the appliance
to the power supply.
Put the BeerTender
Keg tap back in its
original position.
Remove the
BeerTender Keg tap
from the appliance and
fit it again following
section: Using the
BeerTender.
Replace the BeerTender
Keg with a new one.
Install a keg inside the
BeerTender appliance.
Install/position the
tap cover correctly.
10/08/10 14:29:54