Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
V
A
Hz
W
no
.../min
SYMBOLS
NAME
Volts
Amperes
Hertz
Watt
No Load Speed
Alternating Current
Per Minute
Class II Construction
Safety Alert
Read Operator's Manual
Eye Protection
Wet Conditions Alert
Risk of Injection
Kickback
Electric Shock
Chemical Burns
EN - 6
DESIGNATION/EXPLANATION
Voltage
Current
Frequency (cycles per second)
Power
Rotational speed, at no load
Type of current
Revolutions, strokes, surface speed, orbits
etc., per minute
Double-insulated construction
Indicates a potential personal injury hazard.
To reduce tthe risk of injury, user must read
and understand operator's manual before
using this product.
Always wear eye protection with side shields
marked to comply with ANSI Z87.1.
Do not expose to rain or use in damp
locations.
To reduce the risk of injection or injury, never
direct a water system towards people or pets
or place any body part in the stream. Leaking
hoses and fittings are also capable of causing
injection injury. Do not hold hoses or fittings.
To reduce the risk of injury from kickback,
hold the spray wand securely with both hands
when the machine is on.
Failure to use in dry conditions and to
observe safe practices can result in electric
shock.
To reduce the risk of injury or damage, DO
NOT USE ACIDS, ALKALINES, BLEACHES,
SOLVENTS, FLAMMABLE MATERIAL, OR
INDUSTRIAL GRADE SOLUTIONS in this
product.