GreenWorks GPW 1602 Manual Del Operador página 3

Ocultar thumbs Ver también para GPW 1602:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

W A R N I N G
Read and understand all instructions. Failure to follow all instructions listed below may result in electric
shock, fire, and /or serious personal injury.
W A R N I N G
When using this product, basic precaution should always be followed, including the following.
REAd ALL INSTRUCTIONS BEFORE USING THIS PROdUCT
■ To reduce the risk of injury, close supervision is necessary when a product is used near children.
■ Be thoroughly familiar with controls. Know how to stop the product and release pressure quickly.
■ Stay alert and exercise control. Watch what you are doing and use common sense. Do not operate the
product when you are tired. Do not rush.
■ Do not operate the product while under the influence of drugs, alcohol, or any medication.
■ Keep the area of operation clear of all people, particularly small children, and pets.
■ Don't overreach or stand on unstable support. Keep proper footing and balance at all times.
■ Follow the maintenance instructions specified in this manual.
W A R N I N G
Risk of injection or injury – Do not direct discharge stream at people or animals.
GROUNd FAULT CIRCUIT INTERRUPTER PROTECTION
This pressure washer is provided with a ground fault circuit interrupter (GFCI) built into the plug of the
power supply cord. This device provides additional protection from the risk of electric shock. Should
replacement of the plug or cord become necessary, use only identical replacement parts that include
GFCI protection.
SERVICING OF A dOUBLE-INSULATEd APPLIANCE
In a double-insulated product, two systems of insulation are provided instead of grounding. No
grounding means is provided on a double-insulated product, nor should a means for grounding be
added to the product. Servicing a double insulated product requires extreme care and knowledge of the
system, and should be done only by qualified service personnel. Replacement parts for a double
insulated product must be identical to the parts they replace. A double insulated product is marked with
the words "DOUBLE INSULATION" or "DOUBLE INSULATED."The symbol
the product.
EXTENSION CORdS
■ Do not use with extension cord. Plug directly into receptacle.
W A R N I N G
To reduce the risk of electrocution, keep all connections dry and off the ground. Do not touch plug with
wet hands.
IMPORTANT SAFETY INTRODUCTIONS
EN - 3
may also be marked on

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido