Using The Buckle - juju Safe Rider Manual De Usuario

4.4.1. Using the buckle

1. Put the two metal sections ofthe buckle connectors together.(fig. 4.4.1.1)
2. SIot the two buckle connectors into the slot in the top ofthe buckle until they
"click" into place(fig. 4.4.1.2)
3. Check the harness is correctly locked by pulling the shoulder straps
upwards(fig. 4.4.1.3 in pre. page)
To release the harness, press the red button on the buckle downwards.
4.
5. Usage for age (group II III)
The harness system must be removed from the seat (see point 5.1) when used
forthese age groups 15kg-36kg. Only the 3-point vehicle belt system can be used to
buckle up the child car seat.
5.1. Removal of the harness
•
Loosening the harness(see point 4.3), Turn the seat to the back.
•
Slide both ofthe harness straps offthe harness connector (Fig. 5.1.1).
•
Pull the strap till the steel pole gets out ofthe solt (Fig. 5.1.2).
•
Now you can remove the belts as well as the tongue in an upwardsdirection
(Fig. 5.1.3).
•
Installation ofthe harness is carried out in reverse order to removal.
Keep harness with all parts in a safe place, to use in the future.
5.2. Height adjustment of head rest
Regularly check whether the head rest is optimally to your child.
The height ofthe head rest is set optimally to the size of your child, when
their head rests comfortably in the middle ofthe head rest.
•
ln order to set the height, turn the seat to the back. Press down the height
adjuster ofthe head rest. Now the head rest can be pushed upwards or
downwards(fig. 5.2.1).
•
Loosen the height adjuster. the head rest is locked correctly.
After adjust, check that the head rest is locked correctly.
Page 12