Loosening The Shoulder Straps - juju Baby Boo Manual Del Usuario

THE ADJUSTMENT AND USE OF HARNESS
If the height of your shoulder belts in child car seat is not fit for your child, adjust
the height of the shoulder belts. Please proceed as follows:
1.

Loosening the shoulder straps

2. Securing the baby with the harness
Firstly, adjust the shoulder straps height (see point ADJUSTING THE SHOULDER
HEIGHT), proceed as follows:
Step1. Loosen the harness (see point above), open the buckle, and place them down
side ways. Seat your child in the child car seat. Place both shoulder straps over your
child's shoulders.
Step 1: loosen the shoulder harness (see point
Below).
Step 2: Pull out the buckle ton gues from the
chest pad and the slots on the cover and the
shell, then thread them into the corresponding
belt slots.
Ensure that both of the shoulder belts go
through slots at the same height, and not
twisted.
Step 1.The shoulder straps are slackened by pressing
the lever (under the seat cover) on the front of the seat.
Step2. Press down on the label marked "Press" as you
grip the two shoulder straps with your other hand. Pull
the shoulder straps towards you to loosen it.
Page 8