i-SENS KetoSens BT Manual Del Usuario página 37

Step 9
After the symbol appears on the screen, apply the blood
sample to the narrow end of the test strip till the meter beeps. If
the confirmation window is not filled in time because of abnormal
viscosity (thickness and stickiness) or insufficient volume, the Er4
message may appear.
It is recommended to place the test strip vertically into the blood
sample site as shown below.
Caution
Do not allow any foreign substances, such as dirt, blood, or
water, enter into the meter. The meter may be damaged or may
malfunction. Follow the warning information provided below to
prevent possible damage to the meter.
Do not apply the blood sample directly to the test strip port.
•
Do not apply the blood sample to the test strip while holding
•
the meter in a way that the tip of the test strip faces upwards.
The blood sample may run down the surface of the test strip
and flow into the test strip port.
Do not store your meter in unsanitary or contaminated sites.
•
Good Insufficient
Sample Sample
www.i-sens.com 37