Capacitance Measurements - Sonel CMP-401 Manual De Uso

Do not realise measurements if the battery compartment is
open.
In order to realise continuity test it is necessary to realise the
following actions:

place the rotational selector in the position Ω

connect the red test lead to sockets V/Ω/CAP/TEMP and the
black one to sockets COM,

press the MODE button until

touch the test probes to the diode under test - forward voltage
will indicate 0,4V to 0,7V, reverse voltage will indicate "OL";
shorted devices will indicate near 0mV and an open device will
indicate "OL" in both polarities,

having done the test disconnect the test leads from the meter.
5.6

Capacitance measurements

Measurements must not be realised in live circuits. Capaci-
tors must be discharged.
Do not realise measurements if the battery compartment is
open.
In order to realise capacitance test it is necessary to realise the
following actions:

place the rotational selector in the position Ω

connect the red test lead to sockets V/Ω/CAP/TEMP and the
black one to sockets COM,

press the MODE button until F appears on the display,
44
WARNING:
WARNING:
WARNING:
CMP-401 – USER MANUAL
appears on the display,
CAP,
CAP,